|
|
|
Who's Online
There currently are 357 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Acurate informations inside the SM and I could repair my old Sansui SC-3330 without any problems. Thanks.
;
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
Y DRIVE, SCAN (A), (B) Assy
1
Remove the three screws.
7 8
Remove the Rear Case 50 (M). (Screws × 20) Remove the Y DRIVE Assy. (Connector, Screws × 8)
Y DRIVE Assy
8
Front Case 50 (M)
×2
8
×2
8 2 3 4
Loosen a rivet. Remove the Lead Cover MX. Pull out a Flexible Cable. SIDE KEY Assy
1
×3
8
×2
8
×2
2
Lead Cover MX
4
Rivet 3 Turn it not to press the rivet. (Because when the rivet presses, Lead Cover fit in once again.) MX It is easy to remove when pull out the Lead Cover MX with the rivet before completely removing the rivet.
5 6
Remove bottom by the fulcrum at the top of Front Case (50). Remove the Front Case (50).
9
Reverse the SCAN (A) and SCAN (B) Assemblies.
10 When it is necessary, exchange the ROM.
SCAN (A) Assy
Front Case 50 (M) ROM ×6 Rear Case
6
Aluminum Materials It is the structure that a hook of Front Case (50) was put between with Rear Case and aluminum materials.
9
9 5
SCAN (B) Assy
140
|
|
|
> |
|
