|
|
|
Who's Online
There currently are 6020 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
All ok. I pay 5 $ and now i have 92 pages of good scaned service manual for my oooooold akai. Now i will try to repair it.
;
good and ok, very nice , good and ok, very nice, good and ok, very nice
;
Super manual it contains all the things you need to service your Marantz 2100.
;
A very easy to understand and use manual. Well worth the money.
 ;
Very good information with clear drawings. Thanks!
CP-SX5600W
4-4 CYCLE OFFSET adjustment (vertical stripe adjustment)
Signals for internal adjustment Adjustment procedure 1. Make this adjustment after completing the adjustment in 4-3 Flicker adjustment. 2. Use DAC-P - CYCLE - R: in the Adjustment menu
24 48 72 /256 /256 /256 96 120 /256 /256 144 168 /256 /256 192 /256
to adjust so that the vertical lines spaced every 12 dots are as inconspicuous as possible. 3. In the same way, use DAC-P - CYCLE - G: in the Adjustment menu to adjust vertical stripes of G color. 4. In the same way, use DAC-P - CYCLE - B: in the Adjustment menu to adjust vertical stripes of B color.
CYCLE
NO. 1
R
0
G
0
B
0
Major adjustment cycle No.
4-5 White balance adjustment
GAMMA MENU (left side)
VID-AD C.UNIF. 93% 86% 75% 43% 29% 14% 0% DAC-P R 0 0 0 0 0 0 0 GAMMA GAMMA G 0 0 0 0 0 0 0 B 0 0 0 0 0 0 0
Preparations 1. Perform these adjustments after the CYCLE OFFSET adjustment described in Section 4-4. 2. Reset gamma correction before adjustment. Place the cursor on [GAMMA] (left side) in the Adjustment menu, press the [RESET] key and select [DEFAULT]. Now press the [RESET] key again and press the [MAGNIFY-OFF] button of the Remote control transmitter for 5 seconds or more (the confirming to �MICRO� reset menu will appear).
GAMMA GAMMA G 128 128 B 128 128
GAMMA MENU (right side)
VID-AD C.UNIF. DAC-P R SUB CONTRAST SUB BRIGHT 128 128
Place the cursor on [GAMMA] (right side) in the Adjustment menu, press the [RESET] key and select [DEFAUT]. 3. Whisper mode set to [Normal] in the Setup menu.
Adjustment procedure 1. First, adjust the G color. 2. GAMMA mode set to [DYNAMIC] in the lmage menu. 3. BRIGHT and CONTRAST set to in the Setup menu. 4. Place the cursor on Slide Show in the Adjustment menu [A/D], press the [ ] key three times to display G monochrome and adjust the luminance at the center of the screen. Make a note of the setting (here assumed to be A [lx]). Press the MENU key to return. 6
5. BRIGHT and CONTRAST is returned to default in the Setup menu. 6 GAMMA mode is returned to default in the lmage menu. 7 Place the cursor on 0%, measure the illumination at the center of the screen. Make a note of the setting (here assumed to be B [lx]. 8. Adjust Gamma, 93%, and G: in the Adjust menu so that luminance (Y) at the center of the screen is adjusted as follows. Y = (A-B) x 0.680 +B ± 2% [lx]
|
|
|
> |
|
