|
|
|
Who's Online
There currently are 5998 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Exactly as described, the full user-manual (145 pages). Perfect.
¡Press the s button to go back to the previous upper
Notes
¡Press the CLEAR button, and the last-programmed
hierarchy.
¡If the entire program cannot be displayed at once on
the screen, �L� appears to go to the next page.
entry will be deleted. ¡Press the RETURN button, and the STOP screen will show up with the programme contents in memory.
¡The programme setting will be cancelled when the
3 When the disc has been programmed, press
the PLAY button. ¡Programmed play starts.
power is turned off or the disc tray is opened. ¡Programme will be cleared when you turn the power off. TO CLEAR THE PROGRAMME ¡Press the STOP button twice, and the programme will be cleared.
SETTINGS
CHANGING THE AUDIO LANGUAGE OR SOUND MODE
DVD CD
For audio CDs
Press the AUDIO button during playback. ¡Pressing the AUDIO button cycles the sound mode
through STEREO, L-CH and R-CH. The DVD player has a function which allows you to select the desired audio language and sound mode.
AUDIO STEREO
Both right and left channels are active (stereo).
AUDIO L-CH
For DVDs
Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language. ¡The audio language can be changed if multiple
Only the left channel is active.
AUDIO R-CH
Only the right channel is active.
languages are recorded on the DVD being played.
AUDIO 1.ENG DolbyD 5.1CH
Notes
¡Pressing the Audio button may not work on some
AUDIO 2.FRE DolbyD 5.1CH
DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.
¡Current audio language and sound mode will be dis-
played when you press the AUDIO button at first.
AUDIO 3.JPN DolbyD 5.1CH
¡If a desired language is not shown after pressing the
HELLO
Bon jour
Note
¡For some Audio language, three dashes (---) may
appear instead of a three-letter abbreviation for the language (ENG, FRE, etc.).
Audio button several times, the disc does not have an audio source in that language. ¡The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. ¡The screen display will disappear after about 5 seconds. ¡If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.
� 22 �
2C01
EN
|
|
|
> |
|
