HITACHI DVP745EUK
Owner's Manual

DVD SETUP Audio Setting Display Setting

DVD
Set your surround modes for DVD player through your receiver or processor. DVD�s audio setup will not affect CD playback. 1 In STOP menu press SETUP. 2 Press s or B to select �CUSTOM�, then press ENTER. � CUSTOM menu will appear. 3 Press s or B to select �AUDIO�, then ENTER to confirm. 4 Press K or L to select an item, then press ENTER.
AUDIO DRC DOWN SAMPLING DOLBY DIGITAL DTS MPEG ON ON BITSTREAM OFF PCM

DVD
You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. 1 Press SETUP in STOP mode. 2 Press s or B to select �CUSTOM�, then press ENTER. � CUSTOM mode will appear. 3 Press s or B to select �DISPLAY�, then press ENTER to confirm. 4 Press K or L to select from an item, then press ENTER. TV ASPECT : QUICK � Press K or L for an item selection, then press ENTER. � 4:3 LETTER BOX displays a theater-like image. Black bars appear at the top and bottom of the screen. � 4:3 PAN-SCAN is the traditional TV mode with a full height picture with both sides trimmed. � Select 16:9 WIDE if a wide-screen TV is connected to the DVD player. � The default setting is 4:3 LETTER BOX. STILL MODE :
DISPLAY TV ASPECT STILL MODE ANGLE MARK FRONT DISPLAY LOGO VIDEO OUT 4:3 L-BOX AUTO ON BRIGHT ON Component(I)

DRC (Dynamic Range Control) : � To compress the range of sound volume. � DRC function is available only on the discs that are recorded in the Dolby Digital format. � The default setting is ON. DOWN SAMPLING : � Set to ON when outputting in 48kHz. � Set to OFF when outputting the original sound. � When playing disc with copyright protection, the sound will be down sampled at 48kHz even if you set it to OFF. � DOWN SAMPLING function is available only on digital output of a disc recorded in 96kHz, and when the unit is connected to another source using the digital out jack. � DOWN SAMPLING function is available only on the discs that are recorded in the Dolby Digital format. � The default setting is ON. DOLBY DIGITAL :

� Press K or L for an item selection (AUTO, FIELD or FRAME), then press ENTER. � Select AUTO usually. � If you select FIELD, pictures in the still mode will be stabilized although they will be coarse due to little amount of data. � If you select FRAME, pictures in the still mode will be highly defined although they will be blurred due to output of two fields at the same time. � The default setting is AUTO. ANGLE MARK : � Press ENTER repeatedly to turn Angle mark ON or OFF. � The default setting is ON. FRONT DISPLAY : � Press K or L for an item selection (BRIGHT, DIM or AUTO DIM), then press ENTER. � When AUTO DIM is selected, the display dims only during playback. � The default setting is BRIGHT. LOGO: � Press ENTER to switch ON (opening picture)/OFF(black). � The default setting is ON. VIDEO OUT : � Press K or L for an item selection (SCART, COMPONENT INTERLACE or COMPONENT PROGRESSIVE), then press ENTER. � This setting will be effective when you exit the setup screen by pressing SETUP. � The default setting is SCART. � When VIDEO OUT is COMPONENT PROGRESSIVE, �P. SCAN� appears on the DVD player�s display. � Refer to page 11 for more details. 5 Press SETUP to exit. NOTE: � Be sure to press SETUP, or the setting will not work.

QUICK

Set to BITSTREAM when the player is connected to Dolby Digital Decoder. (BITSTREAM : Dolby Digital OUTPUT) (PCM : Converts the Dolby Digital to PCM) � The default setting is BITSTREAM. DTS : QUICK � Set to BITSTREAM when connected to DTS decoder. � The default setting is OFF. MPEG : BITSTREAM: Output MPEG sound Set to BITSTREAM when the unit is connected to an MPEG Decoder � The default setting is PCM. 5 Press SETUP to exit.

QUICK

Virtual Surround

DVD

CD

MP3

You can enjoy stereophonic virtual space on your existing 2 channel stereo system. 1 Press SURROUND during playback. 2 Press SURROUND to set it 1(Natural effect), 2(Emphasized OFF effect) or OFF. 3 Press MODE or RETURN to exit. NOTES: � Virtual Surround will not be effective if the surround mode is set to any selection other than STEREO (for CD play only). � Turn down the level or turn it �OFF� if the sound is distorted. � The setting will be saved even if the player is turned off.

� 17 �

EN

English