I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
Text excerpt from page 20 (click to view)
Disassembly and Reassembly > Disassembly
(4) Digital P.C.B
1) Remove the FFC. When replacing Digital P.C.B, pay attention as below. 2) Remove the 2 screws [D]. 3) Pinch the tab with the pliers to pull out the 3 connectors and Digital P.C.B.
3) Tab
3) Connectors
Digital P.C.B
FFC
1) FFC
No Good
Parallel
[D] M2.6X7(Gold)
Insert the FFC so that it is parallel to the connector.
After inserting the FFC, check that the FFC doesn't incline.
2) Screw [D]
Fig. 4-2-4
(5) DVD-RAM Drive
1) Remove the 4 screws [E]. 2) Pull out the DVD-RAM Drive vertically and remove the connector.
DVD-RAM DRIVE