|
Who's Online
There currently are 5576 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The manual was as described. Complete with parts list and technical information. Fast delivery.
;
Simple and fast...
The diagrams are clear and legible; i have been a great help.
The site is very reliable and precise thanks.
;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
Disassembly and Reassembly > EEPROM Data Backup and Write
5-4 EEPROM Data Backup and Write
Perform this work whenever you replace the MAN circuit board on which the EEPROM is mounted. Create a backup �le of the data in EEPROM to be replaced in a PC, and write the backup �le to new EEPROM: Some adjustment items that are performed after replacement can be omitted. Refer to �6-3-2 List of Adjustments Needed After Replacing Major Components� for adjustment items that can be omitted. Information: It may be impossible to back up the data in EEPROM to be replaced, depending on the status of fault: In such a case, replace the MAN circuit board, and then perform �6-4-1 Initial Data Write�.
(1) Preparations
1) Open the LCD monitor. Insert a �ne-tipped �at-bladed screwdriver into the groove in adjustment cover, and remove the cover from L case in the direction of the arrow: Be very careful not to scratch the cover or L case with screwdriver 2) Connect the DVD video camera/recorder, jig/tool and power supply as shown in Fig. 5-4-1. Refer to �6-1-2 List of Jigs and Tools used when Creating Reference Data� for details on jig/tool and power supply in the �gure. 3) Copy the adjustment software to HDD of PC. Refer to �6-1-6 Copying or Deleting Adjustment Software� for copying. 4) Start the adjustment software in order to display the adjustment menu screen on PC display. Refer to �6-2-5 Starting and Terminating Adjustment Software� for how to start the software.
Caution
It is very dangerous to perform any work with the DVD video camera/recorder disassembled, since the DVD video camera/recorder has a laser-emitting block and high-voltage circuits: Do not remove any parts other than the adjustment cover.
5 - 27
|
|
|
> |
|