|
Who's Online
There currently are 5937 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Helpd me mont a new carradio when prewius mont was a mess.
;
Very good service and quick service, very good quality of service manual!
;
Great tape deck manual!
I'm very positively surprised, because it is a very long manual, lot of pages, drawings, diagrams, description of how to make the alignment and adjustment procedures.
It is as good as the old "Naka" manuals from the 1970's - if somebody have seen them, they know what I mean by that.
I recommend to buy this very much !
;
I am a vintage hifi collector. No way to fix that device without the appropriate service manual...thanks to your site I got it and every thing is easier now. I got the manual right after ordering: fast cheap accurate ... thank you
;
Wonderful job clear. Qick fantastic. These people are really good. If even a problem arise they are wonderful assisting you. These scheme is so net despite this is a very old TV. Thank you for everything!!!!!!!!
1-2 CONTROLLING VERSION OF FIRMWARE
The firmware is regularly modified as required to improve the performance. Check to see whether the customer problem can be solved by upgrading the firmware : If it can, do so. <Procedure for checking the version of firmware> 1) Open the tray with power on. 2) While holding down the "ADJ/VOL (+)" key on remote con trol, press the "Zoom" key. 3) The version of firmware will appear at the top left of screen. (The display will disappear in approx. 5 seconds.)
DISC LOADING
BANK30.ROM READ START 015
* 1) 015 will be counted down to 000.
VER XXXX Version No.
1 PAL
EU
30 Region Code
Tuner Area
WRITING READ START 000 READ OVER
* 2) WRITING will flash.
<Procedure for rewriting firmware> 1) Turn power on. 2) Place the upgrade CD-R on tray, and press the"OPEN/ CLOSE" or "PLAY" key. 3) Messages will appear at the top left of screen in the order shown below ("MP3 STOP" will appear in the display). 4) When rewrite of the firmware is complete, the system will automatically turn off. 5) Unplug the power cord and then plug it in again. 6) Turn power on, and press the "OPEN/CLOSE" key while "LOADING" is shown in the display to remove the upgrade CD-R (if the CD-R is left in the tray, rewrite of the firmware will restart). 7) Check the version of firmware. Caution: Be sure not to unplug the power cord during the rewrite operation. Note: If the firmware has been changed, etc., we will use Service News, etc. to report on how to obtain new firmware data and create an upgraded disc.
DONE READ START 000 READ OVER
Power will automatically turn off.
1-2
|
|
|
> |
|